• Commodity name: 019 - UK Gold PLX
    • Commodity ID: 1087702343895109632

    Digital Preamp

    A faithful recreation of a 1967 50 Watt British classic. MOOER sampled an excellent example of this amplifier from the personal collection of Tracii Guns in 2017. Synonymous with 70’s classic rock, this MICRO PREAMP goes from crisp, glistening cleans with lots of detail on the blue channel, to classic overdrive with biting mids and just the right amount of low end sag to relive that fully cranked experience of years gone by.

    MOOER MICRO PREAMPS are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand-new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation, and dual-operating modes to suit the needs of all users.

    Key words:
    • Digital Preamp
  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined

Digital Preamp

019 - UK Gold PLX

Digital Preamp

A faithful recreation of a 1967 50 Watt British classic. MOOER sampled an excellent example of this amplifier from the personal collection of Tracii Guns in 2017. Synonymous with 70’s classic rock, this MICRO PREAMP goes from crisp, glistening cleans with lots of detail on the blue channel, to classic overdrive with biting mids and just the right amount of low end sag to relive that fully cranked experience of years gone by.

MOOER MICRO PREAMPS are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand-new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation, and dual-operating modes to suit the needs of all users.

Features Connections Specification Demo
  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

图片名称

Download

X
  • * High quality dual channel preamp

    * Independent 3 band EQ, Gain and Volume controls for each channel

    * Speaker cabinet simulation on/off  

    * 2 different modes for footswitch operation. On/Off or channel A/B

     

     

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

Related Products