• Commodity name: 018 - CUSTOM 100
    • Commodity ID: 1087702347208609792

    Digital Preamp

    The CUSTOM 100 is modelled on a 100 Watt, plexi-based boutique signature amp. The dual channels span a wide range of EQ and gain settings which make this MICRO PREAMP incredibly versatile. The clean channel can achieve both F style American shimmer and UK style warmth. The drive channel is distinctly Classic British with a modern twist that provides a huge gain range. A great all-rounder.
     
    MOOER MICRO PREAMPs are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation, and dual-operating modes to suit the needs of all users.
    Key words:
    • Digital Preamp

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined

Digital Preamp

018 - CUSTOM 100

Digital Preamp

The CUSTOM 100 is modelled on a 100 Watt, plexi-based boutique signature amp. The dual channels span a wide range of EQ and gain settings which make this MICRO PREAMP incredibly versatile. The clean channel can achieve both F style American shimmer and UK style warmth. The drive channel is distinctly Classic British with a modern twist that provides a huge gain range. A great all-rounder.
 
MOOER MICRO PREAMPs are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation, and dual-operating modes to suit the needs of all users.
Download
Official video
Features Connections Specification Demo

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

图片名称

Download

Micro Preamp_Manual_EN_V03 1531365451861.pdf

X

  • •    High quality dual channel preamp
    •    Independent 3 band EQ, Gain and Volume controls for each channel
    •    Speaker cabinet simulation on/off

    •    2 different modes for footswitch operation. On/Off or channel A/B

  • 1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

  • Modes：Delay and reverb effects with tap tempo functionality.
    Input：1/4” mono audio jack.（Impedance: 1 meg Ohms）
    Output：1/4” mono audio jack（Impedance: 100 Ohms）
    Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
    Current Draw:300mA
    Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    Weight:160g

Related Products