• Commodity name: 013 - Matchbox
    • Commodity ID: 1087702408827129856

    Digital Preamp

    The model inside this preamp is a highly sought after, hand-built and modified version of a classic American style 30Watt combo. The clean channel is fat and dynamic with sparkly highs and warm lows. The drive channel provides more punchy and powerful cleans and vintage overdrive that can sing on every note. This preamp is a delight for true, boutique vintage tone chasers.

    MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

undefined
undefined
undefined
undefined
undefined
undefined

013 - Matchbox

Digital Preamp

The model inside this preamp is a highly sought after, hand-built and modified version of a classic American style 30Watt combo. The clean channel is fat and dynamic with sparkly highs and warm lows. The drive channel provides more punchy and powerful cleans and vintage overdrive that can sing on every note. This preamp is a delight for true, boutique vintage tone chasers.

MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

Features Connections Specification Demo
  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

图片名称

Download

X
  • * High quality dual channel preamp
    *Independent 3 band EQ, Gain and Volume controls for each channel
    *Speaker cabinet simulation on/off
    *2 different modes for footswitch operation. On/Off or channel A/B

     


     

  • Connection:

     

    1.DCIN:

    Connect a DC 9V 300mA centre pin negative power supply

     

    2.INPUT:

    Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

     

    3.OUTPUT:
    Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
    Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

     

    Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

     
  • *Modes:Delay and reverb effects with tap tempo functionality.
    *Input:1/4” mono audio jack.(Impedance: 1 meg Ohms)
    *Output:1/4” mono audio jack(Impedance: 100 Ohms)
    *Power requirements: AC adapter 9V DC , center negative.(Highly recommend to use Mooer Micro Power.)
    *Current Draw:300mA
    *Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
    *Weight:160g

Related Products