GE250 V1.1.0 Update List

• The software version has been changed from V1.1.0 Beta to V1.1.0

• Fixed the bug related to loading 32bit impulse response files.

• Fixed a bug using trail feature with TONE CAPTURE sample.

Notice:The installation of firmware update will reset the unit to facotry setting, including the preset patches. Recommend to backup your presets beforehand. 

----------------------------------------------------------------------------------------------------------------

Users can download and install the MOOER STUDIO FOR GE250 to update the firmware of GE250. Below is the update procedure.

• Recommend to backup the presets before you update the firmware, prevent unexpected issues during the update. (Refer to the preset management section in the manual)

• Enter www.mooeraudio.com, select SUPPORT-DOWNLOAD, download the GE250 software.

• Unzip the file, install the software. Please ensure the installation path is correct. It will take a few seconds to finish.

• After the installation is finished, connect GE250 to your computer via USB cable.

• Power off the GE250, press and hold Bank Down footswitch, power on GE250. Hold the Bank Down footswitch until GE250 is booted to update mode.

• Open the MOOER STUDIO FOR GE250 software, click on START. The update will start. It will take a few minutes to finish.

• After the update finished, the GE250 will reboot automatically. The firmware version will be displayed on the start screen.

• Reopen the software, import the preset files, then you can enjoy the GE250 with the new firmware.

Notice

1. If the firmware version of GE250 does not make any difference before and after the update, please check if the software is installed correctly, and check the version of the software. If the software version is the old one, please uninstall it and try to download and install the version you desire.

2. Please do not power off GE250 or close the update program during updating, prevent unexpected issues.

3. The system setting, for example, MIDI, TAP TEMPO setting may be back to factory setting after update (Depends on the firmware update in the future). Please keep an eye on the MOOER official platform for the latest news about it.